ETS REJUVASUN 332, Руководство пользователя

Страница: 18 / 36

28940-01A
13
Installation - Remote Connections
CAUTION
The remote connection is not designed to supply
or accept high voltage, nor can it provide power
to an external timer. The sunbed’s remote inter-
face circuitry operates on 5 volts, attempting to
connect it to any higher voltages will damage the
sunbed as well as void your warranty.
Remote Connections
Your sunbed incorporates advanced circuitry
allowing it to connect and communicate with
most remote control systems. If a remote sys-
tem is to be used, first determine whether the
remote system is a T-Max® Manager Pro
System or a standard remote system operating
with a control relay. Follow the appropriate
instructions for your system type.
T-Max® Manager Series
The T-Max® Manager series offers the ulti-
mate in sunbed control, while allowing the
tanner easy straightforward operation. The
Manager/Plus, Manager/Pro and Manager G2
are equipped to run the
Rejuvasun directly.
The circuitry inside your sunbed eliminates
the need for the T-Max 1A, 3A or 3W when
connecting to the T-Max Manager series. Your
sunbed supports the auto addressing feature
of the Manager and the following parameters:
5, 6, 7, 8, 9, 10, 15 and 23. See your T-Max®
manual for descriptions of these parameters
and how they function.
Special Note on T-Max®
The Rejuvasun with Omnilux requires the lat-
est software in your T-Max remote system to
properly control the sunbed. To check for this,
when applying power to a Manager/Plus or
Manager/Pro a 3-digit version number will
appear on the left-hand side of the screen.
This must be 4.23 or higher. The Manager G2
should be 029 or higher. An upgrade CD is
included with your sunbed. Follow the
instructions on the CD.
T-Max® Wireless Remote System
The T-Max® G2 eliminates wires in your
salon, allowing easy setup without hiring an
electrician to run wires. It also protects your
investment from damage by isolating each
unit from one another. Your sunbed arrives
“wireless ready”, which means it connects
directly to the T-Max® wireless system. Older
tanning beds, and T-Max® managers, also uti-
lize this system but require a T-Max “Power
Injector” (PI) to provide the needed power to
the wireless unit.
Remote System Hook-up Scenarios
Follow the diagrams on the next page to see
the many different scenarios for hooking up
your salon. If you need further assistance, call
T-Max® directly at 471-272-0761.