ETS REJUVASUN 332, Руководство пользователя

Страница: 19 / 36

28940-01A
14
Installation - Remote Connections
NOTE: A T-Max® 1A with a
“master” chip can be substituted
for a 3A.
Scenario 1 - T-Max® Manager Series with Complete Wireless
Connect one G2 (with Power
Injector) to the Manager/Pro and
one G2 to each of the tanning
beds. Install as many beds as you
like with this configuration. Units that do
not communicate with T-Max will need a
G2 with Power Injector and an additional
3W to operate. You can place your sunbed at
any location in the series.
Scenario 2 - T-Max 3W with Wireless
In single sunbed installations, the T-Max® 3W can offer the same
control as the T-Max® Manager/Pro, eliminating the need for a
Manager. The remote control bypass plug must not be used in this
configuration. The 3W may be used as a “master” with no modifica-
tion.
After you have set the T-Max® 3W’s, address to “0” (refer to your T-
Max® user’s guide) and the sunbed’s address to “1”, simply connect
one G2 to the T-Max® 3W and one G2 to the tanning bed.
Scenario 3 - T-Max® Manager/Pro
Series with Wireless combo
Connect one G2 (with Power
Injector) to the Manager/Pro and
one G2 to a wireless ready tanning bed.
The rest of the salon may be “daisy-
chained” together and connected to the wireless
equipped tanning bed, eliminating the need to
wire the Manager/Pro to the tanning beds.