Images are for illustrative purposes.
We reserve the right to make changes.
RDT-59-0322
15
®
NORD
canopy
|
EOZ installation guide
Control Panel and EOZ data wiring
There are three cables that must be connected to the Control Panel. Data cable (3x0,25mm2) for communication
between Control Panel and EOZ unit, I/O cable (5x0,5mm²) for connecting to the building automation and LAN
cable to access the Control Panel via internet.
Wiring Control Panel to the EOZ unit is done with 3x0,25 mm² shielded data cable.
Begin by installing the EOZ data cable between the EOZ unit and the Control Panel. Note the colors of the wires
used when connecting the three terminals A, B+ and C.
Next, connect the cable to the EOZ as shown below. Ensure that the cable color used for each terminal is
the same on both devices.
Control Panel
EOZ-2
3x0,25 mm
2
Data cable
A
B+
C
