EtiamPro ENVR208, Руководство пользователя

Страница: 138 / 196

ENVR208
The system can be configured to send an Email notification to all designated users when a
specified event occur, such as an alarm or motion event is detected, or the administrator password
is changed, etc.
Before You Start
The device must be connected to a local area network (LAN) that contains an SMTP mail server.
The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification.
Step 1 Go to System > Network > Advanced > Email .
Figure 15-7 Email Settings
Step 2 Configure the following Email settings.
⚫
Enable Server Authentication : Check to enable the function if the SMTP server requires user
authentication and enter user name and password accordingly.
⚫
SMTP Server : The IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
⚫
SMTP Port : The SMTP port. The default TCP/IP port used for SMTP is 25.
⚫
Enable SSL/TLS : Check to enable SSL/TLS if required by the SMTP server.
⚫
Sender : The name of the sender.
⚫
Sender's Address : Sender's Address.
⚫
Select Receivers : Select the receiver. Up to 3 receivers can be configured.
⚫
Receiver : The name of the receiver.
⚫
Receiver's Address : The Email address of user to be notified.