ETI SNOW SWITCH LCD-8, Инструкция по установке и эксплуатации, Страница: 9 / 10

9 PART NO. 24861 REV A.0 INSTALLATION AND OPERATION MANUAL |
SPECIFICATIONS
GENERAL
Area of use Nonhazardous locations
ENCLOSURE
Protection
Cover attachment
Polycarbonate with machine screws
Entries 1 x 3/4" entry (bottom)
Material Polycarbonate
Mounting Pole mount
Dimensions 4.6" (W) x 6.1" (H) / 117mm (W) x 155mm (H)
CONTROL
Supply voltage ETI PN 24781: 24VAC; 50/60 Hz
Load 3 amp maximum inductive
3 amp maximum resistive
Heater Hold-On timer 0, 1, 3 (default) or 5 hours; configured by magnetic reed switch
Set point temperature Off (moisture only), 36°F, 38°F (default), 38°F;
configured by magnetic reed switch
INTERFACE
Status indicators SUPPLY (green): Power on; will flash while in configuration mode
HEAT (yellow): Heating cycle in progress
WIRE AND CABLE RATINGS
Power cable Size for heater load (16 amps maximum)
Heater cable Size for maximum heater load
ENVIRONMENTAL
Operating temperature –40°F to 104°F (–40°C to 40°C)
Storage temperature −67°F to 167°F (−55°C to 75°C)
ORDERING INFORMATION
Order Number Description
24781 LCD–8, 24VAC
18703 Red Wire Nuts (QTY 4)
24861 LCD–8 Manual (QTY 1)