ETI SNOW SWITCH LCD-8, Инструкция по установке и эксплуатации, Страница: 6 / 10

6 PART NO. 24861 REV A.0 INSTALLATION AND OPERATION MANUAL |
LCD-8 MAGNETIC REED SWITCH
The LCD-8 uses an internal magnetic reed switch (Figure 4),
where the user swipes a magnet (Figure 5) externally across this
switch (Figure 6) to start a hold-on cycle or to terminate a
running hold-on cycle. The magnetic switch determines
whether the user’s action “swipes” or “holds” the magnet
during LCD-8 configuration.
Magnetic Switch
(inside unit)
FIGURE 4
MAGNETIC REED SWITCH
(internal)
Magnet
FIGURE 5
MAGNET
(external)
FIGURE 6
Positioning (left) and swiping (right) external Magnet over
internal Magnetic Switch