EW50 Industrial LTE Cellular Gateway
44
Query Interval
defines the transmitting interval between two DNS Query or
ICMP checking packets.
Loading Check
1. Optional setting
2. Box is checked by
default
Check the
Enable
box to activate the loading check function.
Enable Loading Check allows the gateway to ignore unreturned DNS
queries or ICMP requests when WAN bandwidth is fully occupied. This is to
prevent false link-down status.
Latency Threshold
defines the tolerance threshold of responding time.
Fail Threshold
specifies the detected disconnection before the router
recognize the WAN link down status. Enter a number of detected
disconnection times to be the threshold before disconnection is
acknowledged.
Target 1
1. Optional setting
2.
DNS1
is selected by
default
Target1 specifies
the first target of sending DNS query/ICMP request.
DNS1
: set the primary DNS to be the target.
DNS2
: set the secondary DNS to be the target.
Gateway
: set the current gateway to be the target.
Other Host
: enter an IP address to be the target.
Target 2
1. Optional setting
2.
None
is selected by
default
Target1 specifies
the second target of sending DNS query/ICMP request.
None:
no second target is required.
DNS1
: set the primary DNS to be the target.
DNS2
: set the secondary DNS to be the target.
Gateway
: set the Current gateway to be the target.
Other Host
: enter an IP address to be the target.
Save
N/A
Click
Save
to save the settings.
Undo
N/A
Click
Undo
to cancel the settings.
