15
MOUNTING REMOTE CONTROLS
1) Safety precautions on Bath remote controller / Ensuite installation.
• Before remote controller installation, check the hole position considering wall stud location.
• Note : Do not dismantle the remote controller due to water-proof design.
• Do not install remote controller where water will contact the remote controller directly.
• The remote controller cables carry low voltage, 12VDC digital.
2) Installation of Bath remote controller / Ensuite.
• Drill a hole (more than dia about 12mm) in a wall for the remote controller cables.
• After passing the remote controller cables through the hole, remove the packing's back
paper of remote controller. Then attach the remote controller to the wall.
• Detach both end covers of remote controller and fix the remote controller to the wall with
wood screws(2pcs) in the screw holes provided. Do not tighten the screws excessively,
as the screw hole may be damaged. In case of mounting the remote controller on tile,
cement or mortar, use an expansion bolt.
Wood screw
Cover
Cover
Expansion bolt
Remote controller cables
Remote controller
packing
Remote controller
cables