15
Wall Mounting
Mounting Steps
1. Install mounting brackets with 6 screws on top and bottom back of the unit.
Select a location on the wall to mount the unit. The included wall bracket has been pre-drilled for easy installation
on standard stud walls. If the framing is not standard or installing on an uneven surface, fasten 3/4" plywood to
the stud wall and then attach the wall bracket.
Hang the unit on the mounted wall bracket and secure bottom of the unit to the wall with included wall anchors
and wall screws.
2.
3.
1/4"x1 ½" Screws
The water heater must be properly supported; if the wall is not strong enough, be sure to reinforce the wall.
The unit must be mounted on a vertical wall and level to the ground.
WARNING
!
!
Philips Head Screws
1/4"x3/8"
Philips Head Screws
1/4"x3/8"
1/4"x1 ½" Screws
