ETC Sensor3, Руководство по модернизации

Страница: 6 / 20

4 CEM3 Sensor Rack Retrofit Manual
* The need for these cards and the required quantity are based on specific enclosure type. For details contact
ETC Technical Services (see
Help from ETC Technical Services
on
page 2
).
Additional Items

CEM3 (Required)
7140A1003
1
Sensor3 AF Card (Optional)
7150B5623
up to 4*
Required Tools

#1 Phillips screwdriver
#2 Phillips screwdriver
1/16" (1.5 mm) or smaller precision flat head screwdriver
Dental pick or other small-point tool (for DIP switches)
Heat gun
Flush cutting diagonal wire cutter
Permanent marker
Wire strippers
Note:
A butane torch is not acceptable to shrink the large heat shrink. You must use a heat
gun.