ETC EVF-0509, Руководство пользователя, Страница: 14 / 64

9 Vortek NXT Hoist User Operations Manual
Chapter 6
Incoming Goods, Transport and Storage
6.1 Unloading Vortek Hoists
Each Vortek hoist crate has a label that identifies hoist type and position and whether the crate
contains the project packet, project drawings, this manual, the Rigging System Commissioning Signoff
and Rigging System Training Signoff forms.
Each crated Vortek hoist weighs approximately 500 kg (1100 lbs.).
There are only two places where the Vortek crates can be lifted with a forklift, the side and the Motor
End.
Figure 3: Lifting positions
The first lifting point is from the Motor End
[Figure 4]
with a forklift that has fork tines that are at least
104 cm (41") long, a maximum of 22 cm (8-1/2”) wide and 5 cm (2") thick to use this location.
Figure 4: Lifting by Motor End position
WARNING:
Never lift the crate from the Tail End position. If lifting the crate by an end
position, only lift it from the Motor End (heaviest) position.
Tail
Tail End
a a
MOT
OR E
ND
MOTO
R END