ETC EVF-0509 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 64

ETC EVF-0509 Скачать руководство пользователя страница 12

7

Vortek NXT Hoist User Operations Manual

Chapter 4

Vortek Hoist

4.1 Intended Use

A Vortek NXT hoist is a fixed- or variable-speed electric wire rope winch designed for use in the
entertainment and event industry (theatres, multi-purpose halls, exhibition halls, television and radio
studios, concert halls, schools and other rooms for shows and events).

It is designed to work individually with the QT1-C Field Service Kit or in combination with other Vortek
hoists, controlled by Foundation

®

, QuickTouch

®

, and Qui

®

user interfaces.

Lifting operations permitted by the manufacturer are for set up use without people under or in
proximity of moving loads unless a specific scenic motions risk assessment, issued by a qualified person,
states otherwise in accordance with local regulations.

This machine is not intended for use in potentially explosive atmosphere and/or in contact with
dangerous substances. This equipment is not intended to lift, move, fly, suspend or automate people
or domesticated animals, and such use is strictly prohibited.

4.2 Operating Environment

The Vortek hoist is designed for indoor use only and designed to work in ambient temperatures
between 0°C and 40°C (32°F and 104°F), 10-90% non-condensing humidity.

The Vortek hoist has an Ingress Protection (IP) rating of IP40.

Vortek hoist emission sound pressure level is below 70db at the operator’s position.

This guide assists with the most common ETC installations and scenarios showing basic mechanical
layouts.

Each installation will have its own layout and drawings as specified by the Architect and Theatre
Consultant that works best for the theatre involved.

Refer to the drawings for specific information that may be needed.

If any questions arise, please contact ETC at: +44 (0)20 8896 1000 or ETC authorized representatives.

When calling please specify whether the question refers to an electrical or mechanical rigging issue.

«
...
10
11
12
13
14
...
»

Содержание EVF-0509

































































Отзывы:

Нет отзывов