ETC Installation Guide
Pro One-Cell
Pro One-Cell
Page 2 of 29
ETC
System Overview
ArcSystem luminaires are available in 100–240 V standard models with IEC connectors, 100–125 V
emergency models with NEMA 5-15 connectors, or 100–277 V hard-wired standard or emergency
models. ArcSystem Pro One-Cell luminaires require an external driver.
ArcSystem Pro One-Cell
•
external 100–277 V D1 Series or D4 Series
driver required
•
ideal for short/medium throw
•
25 W full load power consumption
•
fixed version recessed/flush mount only
•
adjustable version recessed/flush mount with
two-axis tip and tilt
•
yoke mount version with two-axis tip and tilt
•
beam angle options: 18°, 30°, 50°
ArcSystem Pro One-Cell Small
•
external 100–277 V D1 Series or D4 Series driver
required
•
ideal for short/medium throw
•
25 W full load power consumption
•
adjustable version recessed/flush mount with
single-axis tilt
•
yoke mount version with single-axis tilt
•
beam angle options: 19°, 24°, 37°, 60°
ArcSystem Pro One-Cell High Output
•
external 100–277 V D1 HO driver required
•
ideal for long throw
•
100 W full load power consumption
•
fixed version recessed/flush mount only
•
adjustable version recessed/flush mount with
two-axis tip and tilt
•
beam angle options: 18°, 30°, 50°
ArcSystem Pro One-Cell Micro
•
external 100–277 V D2 driver required
•
ideal for short/medium throw
•
20 W full load power consumption
•
adjustable version recessed/flush mount with two-
axis tip and tilt
•
yoke mount version with two-axis tip and tilt
•
beam angle options: 19°, 24°, 37°, 60°
Note:
The ArcSystem Pro One-Cell Micro is not available in 5000 K or Fade to Warm
variants. The ArcSystem Pro One-Cell High Output is not available in 3500 K, 4000 K,
5000 K, or Fade to Warm variants.
ArcSystem Pro Multi-Cell luminaires are covered in the
ArcSystem Pro Multi-Cell Installation Guide
and
ArcSystem Installation Manual
. All ETC manuals are available for download free of charge at
.