ETAS ES5340.2, Руководство пользователя

Страница: 86 / 120

ES5340.2 Electric Drive Simulation Board - User’s Guide 86
Configuring the Hardware in LABCAR-RTC ETAS
3. For the option "Use Mode for Analog Output
Device", select the "Analog Arbitrary" setting.
4. With the option "SYNC/Clock Source", the output
can be synchronized to the current motor angle or
a phase-shifted angle (e.g. for predicting current
values) can be used.
5. With the "WaveformTable" option, you can edit the
desired output in the form of a table.
6. Select the "Data" tab to configure default values
for the outputs.
5.3.3 Digital Outputs
These outputs enable you to directly stimulate ECU inputs using values from the
model.
Adding Outputs of Type "Direct Digital Out"
1. Right-click the "ES5340-Master" item and select
Add Item .
2. In the list, select the "ES5340-Digital-Out" item and
click OK .
The item is added.