manualshive.com logo in svg

eta Hack 200 kW, Руководство по обслуживанию

Поделиться
Скачать
eta Hack 200 kW Скачать руководство пользователя страница 15

Cleaning and maintenance

Cleaning (customer)

15

2.5.4

Cleaning the combustion chamber

Clean inside of the secondary combustion
chamber

Open the combustion chamber door and scrape all of
the ash from the secondary combustion chamber into
the primary combustion chamber with the poker.

Fig. 2-13: Secondary combustion chamber

Remove both halves of the combustion chamber cover
from the secondary combustion chamber.

Fig. 2-14: Combustion chamber cover

Clean tilting grate

The tilting grate cannot be rotated by hand. Therefore,
press the [De-ash] 

 button to de-ash the boiler. The

grate is tilted and remains in this position for approxi-
mately 15 seconds.

WARNING!

Danger of crushing due to tilting grate

When the grate is tilted, switch off the boiler with
the mains switch. This causes the grate to remain
in this position so injuries while cleaning the grate
are prevented.

Use the poker to clean the tilting grate and the
openings in it; let the ash fall down.

Fig. 2-15: Tilting grate

Do not hit the tilting grate with the poker.

Clean secondary air openings

Clean secondary air openings (above the tilting grate).

Fig. 2-16: Secondary air openings

Содержание Hack 200 kW





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды