eta Fisso 2019, Инструкция по эксплуатации

Страница: 19 / 56

Recommendation
– Before processing, cut bigger pieces of food into cubes of about 3 x 3 x 3 cm.
– Never crush very hard ingredients with the sickle-shaped knife, such as coffee beans,
nutmeg, nuts, almonds, ice cubes, etc.! The knife would be blunt soon.
– Hard ingredients (e.g. legumes, soya beans, etc.) should be soaked in water before
processing.
– The longer you process the food, the smoother the result will be.
– If you chop hard cheese or chocolate, work for a short time. It is because the ingredients
are heated excessively by chopping, they become softer and they can become lumpy.
The maximum time of processing is
2 minutes
.
V. MAINTENANCE
Unplug the appliance from power supply by taking the plug of the power cord out of
a socket! Do not use rough and aggressive detergents!
Clean drive unit A , gear C1 and lid D with soft and wet cloth with a little detergent. Make
sure that water does not get inside the appliance!
Wash the accessories in hot water
with detergent right after use, rinse it in clean water and wipe till dry (you can also wash
accessories
C
,
E
,
F
,
G
in a dishwasher - but not mixer
B
). The end piece with the shaft of
mixer B must not be immersed during cleaning (Fig. 5).
Be very careful when cleaning mixing adapter
B
and sickle-shaped knife
G
. Make sure that
the cutting edges of the accessories are not in contact with hard objects that make them
blunt and thus they reduce their effectiveness.
Some food can color the accessories in some way. But this does not affect the function of
the appliance and it is not a reason for a claim. This coloring usually disappears after some
time. Never dry plastic moldings over a heat source (e. g. heater, electric/gas stove ).
VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at the special collection places where they will be accepted free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authorities or at a collection site. Fines can be imposed for improper disposal of
this type of waste in agreement with the national regulations. If the appliance is to be put
out of operation for good, after disconnecting it from power supply we recommend cutting
off the power cord and in this way it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration of
the right to guarantee repair!
19
GB
/ 51