eta ETA007090000, Инструкция по эксплуатации

Страница: 45 / 100

EN - 45
EN
III. AT THE FIRST START
Appliance assembling
1. Remove all packaging material and extract the appliance with accessories. Remove
all adhesive foil, stickers or paper (if any) from it Before the first start, wash the parts,
which would be in contact with foods, in hot water with detergent, thoroughly rinse with
clean water and wipe dry, or let them dry off. Attention - the dish mustn‘t be deepened
or washed under running water. Please make sure that the supply cable isn’t damaged
and that it doesn’t go through any sharp or heat surfaces. A wall socket has to be
well-accessible so that the appliance might be easily disconnected from mains in case
of a danger
2. Place the dish in the base of the
appliance with the logo directed to you.
Push it steady downward so that it fitted
to the electric contacts
3. Connect the appliance to the mains by
means of the supply cable
9
and switch-
on the main switch
10
situated on the left
down side next to the ventilating grille
Language selection
• Select a language using the knob or by moving a finger in the list, The selected language
is marked .
• Click to
next
or rotate the knob to pass to the next step.
Connection to a network
• Having finished language selection, choose
connect
• If you choose
I don’t agree
, you may return to the network settings later. However, until
you set connection to the network, it would be impossible to update the recipe book or
appliance software
• Click to a corresponding name to select a network to which you wish to connect.
• Enter a password and confirm it by clicking to
connect
• In case of successful connection, a notice
connected
will appear.
• Now you can return to the main menu by a “back” arrow
<
in the left upper corner of the
display.