eta ETA007090000, Инструкция по эксплуатации

Страница: 43 / 100

EN - 43
EN
• Use the mixer only in its working position and at places where there is no risk of tipping
and in sufficient distance from heat sources (e.g.
heater, stove, cooker, gril
l etc.) and
wet surfaces ( sinks, basins etc.) .
• If processed foods start to get caught on accessories (eg knives, blender walls or lids),
switch off the appliance and carefully clean the accessories with a spatula.
• Use the appliance only with accessory intended for this type of device. Using other
accessory may pose danger for the user.
• Never insert, for example fingers, a fork, knife or spatula into the rotating parts of the appliance.
• Regularly check the condition of the appliance‘s power supply.
• Prevent the supply cord to hang loosely over the edge of the working desk where
children could reach it.
• The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
• If an extension cord is required, it must not be damaged and must comply with the
applicable standards.
• Use the appliance only for the purpose it is intended for as specified in this manual.
Never use the appliance for any other purpose.
• Any texts in a foreign language and pictures on the packaging or product are translated
and explained at the end of this language version.
• WARNING: There is a risk of injury if the device is used incorrectly in accordance with
the operating instructions.
• The manufacturer is not responsible for damage and injuries caused by improper use
of the appliance and the accessories (e.g. food deterioration, injury, cutting) and its
guarantee for the appliance does not apply in situations when the safety warnings above
are not complied with.
• The pictures are only informative.
ATTENTION
The mixer mustn‘t be in operation off-load
for more than 10 seconds!
Wireless connection and compatibility
• The ETA company cannot be liable in any way for any incidental, indirect or
consequential damages, or for any loss of data or loss due to information leakage during
wireless communication.
• Successful wireless communication cannot be guaranteed 100% on all Smart devices
and Wifi networks (routers). Due to the variety of devices on the market, there may
be cases where the character or specification of a given smart device or Wifi network
(router) makes connection impossible or is in some way disturbed. In addition, several
factors, including hardware and software configuration, also affect the success of
wireless communication over a Wifi network. The connection between the robot and
your Wifi network can also be adversely affected by the surrounding Wifi networks that
they can be tuned to the same channel and disrupt connections (e.g. in housing estates,
apartment buildings, etc.). These facts are not a reason to claim the appliance.