eta ePE-K 140 Скачать руководство пользователя страница 41

Страница: 41 / 84

Installation

Mount flue gas connection

The pellet module may not be lifted on the pellet
nozzles as they would be damaged in the

process.

Fig. 9-3: Do not lift on the pellet nozzles

An optional sound-insulation set is available

An optional sound-insulation set is available for
the boiler. If you use this, insert the sound-

insulation strips longitudinally under the boiler's base
frame and also under the stoker's levelling screws.

9.2

Mount flue gas connection

Mounting the flue gas connection

Remove the cover from the top of the boiler.

Fig. 9-4: Cover

Check the flue gas connection seal for damage. Attach
the flue gas connection to the boiler with the nuts.
Tighten the nuts alternately and evenly.

Fig. 9-5: Flue gas connection

Mount the flue gas temperature sensor and secure it
with the screw. Only hand-tighten the screws so as not
to damage the temperature sensor.

Fig. 9-6: Flue gas temperature sensor

Fig. 9-7: Screw

Содержание ePE-K 140





















































































Результаты поиска

Содержание ePE-K 140

Отзывы:

eta ePE-K 140, Руководство по установке, Страница: 41 / 84

Результаты поиска

Содержание ePE-K 140

Отзывы: