eta 2131, Инструкция по эксплуатации

Страница: 40 / 76

Do not use metal utensils, which could scratch the surface during cleaning. It is normal
for the colour of the surface to change over time. This change in no way changes the
properties of the surface and is not a reason for complaint about the appliance!
Lid B / Adaptor for warming up and cooking of foodstuff in steam D5
Wash in hot water with a standard detergent e.g. using the brush, rinse with clean water
and wipe dry. While cleaning take care not to damage the safety valves
B2
,
B4
and the
gaskets B3 , B11 .
Cleaning / replacement of gasket B5 (lid)
Gradually remove the gasket from the holder (i.e. the retaining ring) and the inner side of
the lid by gently pulling it out. Clean the gasket. If the gasket is worn or damaged replace
it with a new one (same type). Insert the gasket in the reverse sequence behind the holder
B6 as far as it will go.
Cleaning/replacement of grommet B3 (safety valve)
From the inner side of the lid gently pull the grommet B3 from valve B2 . Clean the
grommet. If the grommet is worn or damaged replace it with a new one (same type). In the
reverse sequence insert the grommet into the valve groove.
ATTENTION: The valve must
be able to move freely in the lid!
Cleaning/replacement of grommet B11 (steam pressure limit valve)
Pull out the steam limit valve cover B4 from the outer side of the lid. Unscrew the cover B8
from the inner side of the lid. Using a suitable tool (e.g. size 13 spanner) unscrew the nut
B9 , then remove the washer B10 and the grommet B11 . Clean all the parts. If the grommet
is worn or damaged replace it with a new one (same type). In the reverse sequence
assemble the individual parts in the correct order and position (pull the nut tight with
appropriate force) . Ensure that the contact surface and the sealing elements are in order.
Never dry plastic moulded parts above a heat source (e.g. fire stove, electric /gas stove ).
Some foods may stain the accessories in a certain way. This however has no effect on
the operation of the appliance and is not cause for a claim or complaint regarding the
appliance! After some time this staining usually goes away by itself.
Storage
Before storing make sure that the pressure cooker is cool. Insert accessories D into the
cooking pot
C
. Store the pressure cooker in a safe dry location, out of the reach of children.
V. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The pressure
cooker is not
working
The power is not connected
Check the power cord, plug and
el. socket
It is not possible to
seat or secure the
lid on the pressure
cooker
Gasket
B5
is not in its place
Place the gasket in the correct
place in the lid
Safety valve B2 is in the up
position
Check the grommet B3 and if
necessary clean it
(see Maintenance)
Using a suitable tool (e.g.
skewer) push the safety valve
into the down position
40
GB
/ 68