Installation
External ash removal
57
Tighten screws
Fasten the support stand to the floor with suitable
screws.
Fig. 9-79: Support stand
Tighten the screws in the ball joint alternately and
evenly.
Fig. 9-80: Ball joint
9.14.2
De-ashing with ash flap
Technical illustration
The following graphics show the external de-ashing
with an ash flap and an ETA ash bin with 770 litre
capacity. The assembly steps are essentially the same
for other ash bins provided.
Assembling the ash ducts
Affix a sealing strip to both sides of the trough.
Fig. 9-81: Seals
Fasten the ash disposal channel and the transfer
coupling to the trough. Initially only hand-tighten the
screws.
Fig. 9-82: Transfer coupling, ash disposal channel
Remove the fastening panel from the cover and mount
it on the ash disposal channel.
Fig. 9-83: Fastening panel
