Installation
External ash removal
55
Lubricate the drive stub with grease. Align the groove
in the drive stub with the groove in the drive and slide
the drive onto the ash screw.
Fig. 9-70: Drive
Attach the drive to the flange. Secure the drive stub
with the feather key, washer and screw.
Fig. 9-71: Fasten drive
Attach the metal pipe to the trough for the protected in-
stallation of the electrical cables.
Fig. 9-72: Pipe for electrical cables
Install the connection unit for the ash bin
Slide the bellows with the hose clamps onto the
downpipe. Thread the connection unit into the
downpipe and hang it in the highest position (= parking
position for emptying).
Fig. 9-73: Connection unit in the "parking position"
Then perform a visual check to see if there is
enough space between the connection unit and
the ash bin. This ensures that the bin can be slide out
for emptying. If there is not enough space, you must
adjust the installation height of the ash ducts.
Fig. 9-74: Visual check
