37
Basic operating
features
“PED” Pedestrian trigger.
(With no safety beams installed)
User manual reference -
Page 12
The PED trigger is a higher security option and is used when access to or from the property is limited to only pedestrian access.
In the case of no safety beams being installed, then the pedestrian auto-close functionality is disallowed for safety.
If the Loop or the BT triggers are activated at any time during the pedestrian routine, the gate will open to the full open position and the pedestrian
transaction is cancelled. The system then reverts to either the Loop or BT trigger mode depending on which was triggered.
There are two ways of activating the “PED” functions on this control card. Either via the hardwired PED input or the PED receiver channel.
Action
Response
Momentary PED trigger.
Buzzer beeps
pre-run
warning.
After buzzer silences.
Gate begins
opening.
No buzzer tones.
At previously
programmed
pedestrian opening
distance.
Gate stops
and waits for
a pedestrian
trigger to close.
No buzzer tones.
Momentary PED trigger.
Buzzer beeps
pre-run
warning.
After buzzer silences.
Gate begins
closing.
No buzzer tones.
At full closed position.
Gate stops.
No buzzer tones.
x3
x3
STOP
STOP
STOP
Gate closed.
