background image

Spraying the Tanning Solution

 

 
1.

 

Test the spray gun by spraying a small quantity into a waste basket or sink to ensure 

the solution is flowing properly.  

2.

 

Ensure the recipient is standing on a bathmat, towel, or rug.  

3.

 

To spray on the face, ensure the recipient has closed eyes and head tilted slightly. 

Begin spraying the face with a light coat moving down to the neck and then to the 

chest. If starting with the face makes you or the recipient uncomfortable, reverse this 

first step to: chest, neck and then face.  

4.

 

Once this area is complete, spray the abdominal region. 

5.

 

Continue spraying the solution at the recipient’s legs front and to the feet. When 

spraying the front of the legs, have the recipient place one foot out to allow you to 

spray the inside of the leg.  

6.

 

Alternate the outstretched foot to allow the application to all areas of the legs. Ask the 

recipient to turn to spray the outside and inside of arm and side of the neck. 

7.

 

Ask the recipient to turn to their back. Continue spraying at the back of the legs. Where 

necessary, ask the recipient to bend or stretch to allow an even application. 

8.

 

Once you are confident that you have covered all areas of the recipient, it is a good 

idea to apply an additional spray to the face and then examine all areas for sparse or 

excess coverage.  

9.

 

If the solution is dripping, stop it with a towel and spray a small amount to even out the 

application.  

10.

 

After the spraying is complete, turn on a fan in the spraying room or blow dry air from 

the gun. This will accelerate the drying process.  

11.

 

Ensure the recipient does not lower the arms or press their thighs together until the 

sprayed solution is dry. 

12.

 

If the recipient feels stickiness you may use a makeup brush dipped in “Cornstarch” 

based baby powder to lightly dab the sticky areas. Do not use talcum powder. 

 

 

Содержание ESPRTANMTA













Отзывы: