•
Rinse the fluid cup attached to the gun and wash it with clear water.
•
It is not necessary to empty and clean your spray gun when you pause between
applications. However, ensure to clean your spray gun thoroughly at the end of your
work session.
•
Ensure you refrigerate your tanning solution to avoid premature spoiling.
•
Examine the front nozzle of the gun to ensure that there is no residual solution that
could obstruct or diminish the fine atomisation of the solution for the next use.
•
If necessary, clean the nozzle with the cleaning solution and a small brush such as a
toothbrush or nail brush.
•
Remove the fluid cup and spray until only dry air comes from the gun. Wipe off the
outside of the gun, rinse out the fluid cup.
•
Check the intake air filter on the Turbine System to ensure that it is free of lint, hair,
tanning solution residue or other obstructions that could choke the free flow of air into
the Turbine System.
•
Make sure that the air hose, Turbine System, and cord are out of the walkway and the
mat is cleaned and washed.
•
Ensure you have Pro Tanning Solution and Pro Tanning Cleaner.
•
Keep the Turbine Pump intake filter clean.
•
Ensure to re-apply the tan after 48 hours or so for the optimum tan.
CLEANING & CARE
Содержание ESPRTANMTA
Страница 1: ...HVLP SPRAY TAN MACHINE ESSPRTANMTA BOX1...
Страница 2: ......
Страница 11: ...NOTES...