Estate EST-EMTB275 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 32

Estate EST-EMTB275 Скачать руководство пользователя страница 28

28

Other Useful Information (Cont.)

Storage

When it is not in use, store the bicycle in a cool, dry place, protected from dust,
high humidity and frequent temperature changes, and out of reach of children.

For prolonged storage we recommend using the original carton for the bike
and storing the battery separately. Please ensure the battery is at least partially
charged as prolonged storage of an empty battery may damage the battery.

Service and repair

WARNING: Replace worn parts!

As with all mechanical components,

the bicycle is subjected to wear and high stresses. Different materials and
components may react to wear or stress fatigue in different ways. If the design
life of a component has been exceeded, it may suddenly fail, possibly causing
injuries to the rider. Any form of crack, scratch or change of colouring in highly
stressed areas indicates that the life of the component has been reached and it
should be replaced.

Spare parts

Our after sales support centre stocks spare batteries and chargers for the
e-bike. To purchase a part or book a service, please contact the centre on
1300 112 534 or email us at [email protected].

28

AUS

AFTER SALES SUPPORT

MODEL: EST-EMTB275 PRODUCT CODE: 706076 11/2021

1300 112 534

tempo.org/support

«
...
26
27
28
29
30
...
»

Содержание EST-EMTB275

































Отзывы:

Нет отзывов