Estate Swing E-S 1000H Series, Инструкция по эксплуатации

Страница: 54 / 57

E-S 1000H Series Instruction Manual
Control Board Overview
5.9
Light:
Sends pulses of 12VDC only while gate is running, and whether it is
open or closed.
Motor 1: L1-1, L1-2 = 24VDC power to single motor or master motor
Motor 2:
L2-1, L2-2 = 24VDC power to slave motor
Limit1:
OL1 = Open limit for single motor or master (normally closed)
V+ = Common for limits, +12VDC
CL1 = Closed limit for single motor (normally closed)
Limit 2:
OL2 = Open limit for slave motor (normally closed)
V+ = Common for limits, +12VDC
CL2 = Closed limit for slave motor (normally closed)
Photocell:
Photo = Input for safety eye photo beam connection (normally
closed)
GND = Ground for photocell power/ground for photo connection
V+ = +12VDC, Max 50 milliamps for photocell power
12v = Accessory power max 350 milliamps
Button: PUSH 1 = Ground for Push 1 Accessory
COM = Positive v12VDC for Push 1/2 accessory (relay only,
not main power)
PUSH 2 = Ground for Push 2 accessory
*PUSH 1 / COM is for push buttons, keypads, receivers, or any other
dry and momentary contact.
*PUSH 2 / COM is for exit wand, exit loops or other open only dry
contact and momentary contact
E_Lock:
Solenoid lock output - 12VDC (4 Amp max)
A = Positive B = Negative
Fuses:
( 2 ) F1 = 8A 250V, protects power to motors, fused individually
F2 = 2A 250V, protects power to accessory 12V terminals