Estate Swing E-S 1000H Series, Инструкция по эксплуатации

Страница: 9 / 57

E-S 1000H Series Instruction Manual
Tools Needed for Installation
1.4
• Power Drill
• Crescent Wrench
• Flat Head Screwdriver
• Hacksaw/Sawzall
• Phillips Head Screwdriver
• C-Ring Pliers
• Tape Measure
• Level
• Wire Strippers
• C-clamps
*For Dual Gate Openers you will also need: Junction Box & Bus Connector
Other items may be needed prior to commencing installation. Bolded items are necessary to all applications.
• Positive post, bracket or door stop. Although the Estate Swing 1000 features built in limit switches it is highly rec-
ommended to have positive stops.
• 16 gauge, 2 conductor stranded direct burial low voltage wire will be required to run power to your battery.
Length is determined by distance between transformer or solar power supply and the control box.
• 4 - 3/8” Carriage Bolts will be needed to connect the 2 “L” shaped brackets to the post. Length will be deter-
mined by the size of your posts.
• A metal support bracket may be needed to achieve the appropriate desired setback. The metal support
bracket will be bolted or welded to your post to give a larger amount of space to mount the provided mounting
bracket.
• A voltage meter and digital camera may be necessary to run diagnostic checks.
• If your transformer is going to be plugged into an outdoor outlet you will need to weatherproof that outlet and
transformer.
Electrical boxes or plug covers can be obtained from a local hardware store to accommodate
both the plug and transformer.
• Hardware to attach the control box to a post or fence.
• Wire strain reliefs for running wires into control box.
Protect all ongoing and outgoing wires with a surge suppressor.
Consult your local dealer for more information.
!