11.
Assemble flap joiner cap (B26-B30).
12.
Tapping with 4mm tap to fit wingbolts.
13.
Carefully sand right and left boom surfaces.
14.
Temporary assemble wing to fuselage and booms.
Glue leading edge(W33,W34) with
thick CA
.
15.
Glue wingtips(W35-W38).
16.
Insert and glue wing dowels.
Shape and sand the surfaces.
17.
Glue trailing edge(W39) with
thick CA
.
Note
Refer to the wing section on the drawing and use
cardboard to make a gap.
18.
Shape and sand the surfaces.
Note
Refer to the wing section on the drawing
SPONSON
1.
Glue sponson bottom sheets(N10-N11), top sheets(N11-
N12) each together. Assemble and glue sponson frames(N1-
N9) with
thick CA
.
2.
Cover the sheets(N10,N11) with
thick CA
.
Page 8
