10.
Carefully sand surfaces.
STABILIZER and ELEVATOR
11.
Glue the sub leading edge and sub trailing edge(H2),
ribs(H3-H4) on the stabilizer bottom sheet(H1) with thin CA
and
apply thick CA glue at each joints for reinforcing
.
12.
Cover the top sheet(H5) with
thick CA
.
13.
Sand trailing edges of elevator sheets(E1, E4).
14.
Glue the leading edge(E2) and ribs(E3) on the elevator
bottom sheet(E1) with thin CA and
apply thick CA glue at
each joints for reinforcing
.
15.
Cover the top sheet(E4) with
thick CA
.
16.
Glue the leading edges(H7, E5) and trailing edge(H6)
with
thick CA
.
17.
Carefully sand surfaces.
FLAP and AILERON
1.
Sand trailing edges of aileron(A1,A4) and flap sheets(P1,
P6).
2.
Glue the ribs(A2) and sub leading edge(A3) on the aileron
bottom sheet(A1R,A1L) with thin CA and
apply thick CA
glue at each joints for reinforcing
.
3.
Cover the top sheet(A4) with
thick CA
.
Page 3
