3.
Glue leading(N12), trailing edges(N13) and tips(N14) with
thick CA
.
4.
Carefully sand surfaces.
5.
Glue sponson to the fuselage with
thick CA
.
6.
Fix stabilizer to the vertical fin with screws.
(Horizontal
tail must be at right angle to vertical tail.)
Glue H9 parts
to the stabilizer and elevator servo bed(V16) to the vertical
fin with
thick CA
.
7.
Sand H9 pats as shown above.
COVERING AND EQUIPMENT
INSTALLATION
1.
Cover films with your own color scheme.
2.
Assemble tail and insert elevator servo extension.
3.
Glue vertical fins to the booms with
thick CA
.
(
Horizontal
tail must be paralleled with wing and at right angle to
vertical tail.)
4.
Cut CA hinges as shown above.
5.
Install and glue plywood horns with
thick CA
. Apply thin
CA to the horns for reinforcing. Make slots and install hinges.
Page 9
