manualshive.com logo in svg

Essilor Mr Blue 2.0, Руководство пользователя

Поделиться
Скачать
Essilor Mr Blue 2.0 Скачать руководство пользователя страница 97

USER MANUAL > PREPARING A DRILLED JOB

Mr Blue 2.0 > v4.0 -09.16

97

3

2

1

3

2

1

3

2

1

b. Delete one drilling point

Select the drilling point to be deleted.

If you want to delete all drilling points from the shape, select any of them.

Press 

.

Press:

to delete the selected drilling point, or

to delete all drilling points from the shape.

c. Dimensioning a drilling point

You can define a setting for each existing drilling point.

Press on the drill-hole, slot or notch to select it.

Press a few seconds on the setting to be modified:

Diameter

Depth (for non-through holes)

Length of slot or notch

Angle of slot or notch

You can also use the buttons 

 or 

 to reduce or increase the selected value.

Enter the new setting, then press 

 to confirm.

The drilling point is displayed in red.

>

Two buttons are displayed:

.

>

The selected drilling point or all drilling points are deleted from the shape.

>

The drilling point is displayed in red in the shape.

>

The numeric keypad is displayed.

>

The drilling point has been modified.

>

Содержание Mr Blue 2.0

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды