Essilor Mr Blue 2.0, Руководство пользователя

Страница: 137 / 152

USER MANUAL > M’EYE SIGN AND M’EYE TOUCH
Mr Blue 2.0 > v4.0 -09.16 137
This section describes the operation of the tracer relating to:
the M’EYE Sign function (function engraving), Ref. manquante
the M’EYE Touch function (creative distortion). Ref. manquante
Necessary tools before using M’EYE Sign:
1. a Mr Blue 2.0 chain (V8.1 minimum and/or higher version),
2. Essibox:
equipped with the 5.1 (minimum) memory version,
with “Centered Essibox” setup.
For engraving function training, a tutorial is available on the “MEYE Sign” USB key, which is in the box.
1. The “engraving” function on the tracer-centerer-blocker
For further information, refer to the documentation included on the USB key supplied with your pack, or refer to the Essibox on-line
guide.
Once the shape with the engravings of Essibox is received, the following functions are available:
centering
saving the shape in the shape management screen
sending of a shape to Essibox
blocking
For further information, refer to the procedures concerning each function.
The “drilling” and “shape modification” functions are not available on a job involving an engraving (the icons are grayed on
centering page).
2. Using the “creative distortion” function on the tracer-centerer-blocker
For further information, refer to the documentation included on the USB key supplied with your pack, or refer to the Essibox on-line
guide.
To create your own shapes, you can:
use the pre-cut patterns supplied in the pack and do an optical tracing
cut out your own patterns using your imagination and do an optical tracing
use the software available on Essibox via the function “Job management” and its “M’EYE Touch” library.
Once the creative shape is read on the tracer-centerer-blocker or delivered from your Essibox, it is processed like any other type of
shape. The following functions are thus available:
Centering
Shape modification
Drilling
Saving the shape in the shape management screen
Sending of a shape to Essibox
Blocking
For further information, refer to the procedures concerning each function.
For the edging of certain shapes, the use of accessory 18/14 can be mandatory.