Essilor Mr Blue 2.0 Скачать руководство пользователя страница 46

Страница: 46 / 152

USER MANUAL > CENTERING A LENS

Mr Blue 2.0 > v4.0 -09.16

Enter the half-PD and pupillary height.

Position the lens in the middle of the centering chamber.

Press

to start lens tracing.

Once the lens is held by the clamps, it must no longer be handled.

To stop centering at any time, press

Yellow indicators are displayed on the focimeter dots: the centering is perfect.

Display of the optical center of the lens (white cross) and boxing center of the shape (blue cross)

Display of the sphere power

Display of the cylinder power

The cylinder angle is displayed:

The lens base is displayed:

The target moves.

The clamps close on the lens to hold it in position until its blocking.

The lens analysis starts: the tracer searches for the optical characteristics of the lens.

The centered lens is displayed, along with its characteristics, in the work area:

The lens is centered and ready to be blocked.

Содержание Mr Blue 2.0

























































































































































Результаты поиска

Содержание Mr Blue 2.0

Отзывы:

Бренды по названию

Популярные бренды

Essilor Mr Blue 2.0, Руководство пользователя

Результаты поиска

Содержание Mr Blue 2.0

Отзывы:

Бренды по названию

Популярные бренды