Essilor Mr Blue 2.0 Скачать руководство пользователя страница 79

Страница: 79 / 152

USER MANUAL > CENTERING A LENS

Mr Blue 2.0 > v4.0 -09.16

Press

to record the left centering mark.

Position the left-most cross on the marking using the virtual mouse:

Press

to record the right centering mark.

Position the right-most cross on the marking using the virtual mouse:

Press

to record the mark corresponding to near vision.

Position the yellow cross on the point corresponding to near vision using the virtual mouse:

Now, record the data for the second eye.

Press

once the right-eye and left-eye markings have been saved.

The left centering mark is selected.

A green cross appears in the target.

The right centering mark is selected.

A red cross appears in the target.

The recording of the first eye is finished.

The marking has been saved: the next lens with the same marking will automatically be recognised on centering.

Содержание Mr Blue 2.0

























































































































































Результаты поиска

Содержание Mr Blue 2.0

Отзывы:

Бренды по названию

Популярные бренды

Essilor Mr Blue 2.0, Руководство пользователя

Результаты поиска

Содержание Mr Blue 2.0

Отзывы:

Бренды по названию

Популярные бренды