Essilor Mr Blue 2.0 Скачать руководство пользователя страница 101

Страница: 101 / 152

USER MANUAL > PREPARING A DRILLED JOB

Mr Blue 2.0 > v4.0 -09.16

101

Select the drilling point you wish to have as the reference drilling point

Press

on the right of its coordinates.

The symbol # is displayed on the left of its coordinates

The drilling point is displayed in dark blue

in the work area

3. Drilling models

A drilling model consists of all the drilling points configured and positioned on a shape. You can retrieve a model in order to re-use it.

This section describes the following:

Importing a model to a shape

(p.101)

Saving a model

(p.102)

a. Importing a model

This function enables you to re-use the drilling points of a job in the shape management screen in the current job.

Importing a drilling model enables you to retrieve:

The settings of the drilling points (diameter, depth, length, angle)

The height of the drilling points in relation to the center of the shape (Y coordinates)

The distance between the reference drilling point and the edge of the lens

In the drilling-point positioning screen, press

to access the list of drilled jobs saved in the shape management screen.

Select the desired list.

Select the desired job as a drilling model.

Press

to confirm the import of the model.

The settings of each drilling point in the model

The Y coordinates of each drilling point in relation to the boxing center of the model shape

The distance between the reference drilling point and the edge of the lens

The D-dimension (in mm) you have entered for the tracing

The selected drilling point is displayed at the top of the list:

The coordinates of the other drilling points are also updated.

The drilled jobs in the selected list are displayed.

The model is displayed in the preview.

The drilling screen is displayed:

The drilling points are positioned in keeping with:

Two values are displayed under the work area

Содержание Mr Blue 2.0

























































































































































Результаты поиска

Содержание Mr Blue 2.0

Отзывы:

Бренды по названию

Популярные бренды

Essilor Mr Blue 2.0, Руководство пользователя

Результаты поиска

Содержание Mr Blue 2.0

Отзывы:

Бренды по названию

Популярные бренды