Esse 990 ELX, Инструкция по эксплуатации, Страница: 6 / 44

Page 6
990ELX-I02-220319
The cooker must be installed in accordance with: All relevant
British Standards / Codes of Practice and the relevant Building / IEE
regulations
Location of the Oven
This appliance is designed for domestic cooking only. Use for any
other purpose could invalidate any warranty or liability claim.
CONNECTING YOUR COOKER
For your own safety we recommend that a competent person
installs your cooker. This cooker is designed to be installed using
two standard 13 Amp plugs or a single hardwired connection to a
40 Amp cooker spur. A qualified electrician is not required if the
cooker is supplied with 13 Amp plugs but is required for hardwired
connections.
Electrical connection
Ovens with a three-pole power supply cable are designed to
operate with alternated current at the supply frequency and
voltage indicated on the data plate (located on the inner door panel
of the control compartment).
Connecting the power supply cable to the mains:
The appliance is supplied fitted with either two 1.5 metre cables
and two normalized 13 amp plugs, or a single 40 Amp cable for
hardwiring, which correspond to the load indicated on the data
plate. Before making the connections check that: the circuit
breakers or fuses of the home system can support the appliance
load (see data plate); the power supply system has a sufficient
earth connection which complies with the provisions of current
regulations and the law; there is easy access to the socket. Do not
use coiled extension cables or adapters as these could cause
overheating, burning or RCD trip out..