
Page 27
990ELX-I02-220319
Switching On a Zone
To switch on a zone it is necessary to actuate the desired cooking
zone or zones. Once the KEY LOCK is disabled and the hob turned
ON, this is done by means of selecting the zone and then selecting
the required power level.
Fig. 18
A zone is selected by touching the zone [ZONE_SELECTION] key for
0.5 seconds, a beep sounds and the zone display shows the power
level with normal brightness.
If more than one zone is already operating, then the zones that are
not selected are dimmed.
If more than one zone is on, the zone selection will finish 10 second
after the last touch of the [-], [+] key or if another zone is selected.
If only one zone is on, the zone selection will finish if another zone
is selected.
When the zone selection is finished after 10 seconds, a beep sound
and all the zone displays that were dimed show the power levels
with normal brightness.
When the zone selection finishes, if the selected level is 0, the zone
display will be switched off
ZONE SELECTION
Содержание 990 ELX
Страница 1: ......
Страница 13: ...Page 13 990ELX I02 220319 CONTROL PANEL Fig 5 990ELX Cooker control panel...
Страница 36: ...Page 36 990ELX I02 220319...
Страница 37: ...Page 37 990ELX I02 220319 INDUCTION SAFETY POINTS...