Esse 990 ELX, Инструкция по эксплуатации, Страница: 33 / 44

Page 33
990ELX-I02-220319
Starting Timer Countdown
The countdown starts when the timer visualization is finished
touching any ZONE_SELECTION key or automatically 10 seconds
after the last touch of the + or - keys. A beep sounds and the zone
display will show the power level and the dot point showing that
the zone is timed.
Timer Countdown End
When the remaining time has run out, the timed zone is switched
off, the zone display shows a 0 blinking and the timer alarm beeps
for one minute.
The alarm will be cancelled by pressing any key of the touch
control.
Altering the Timer
To change the time for a timed zone it is a repeat of the setting
process.
Fig. 25 Select the timed zone to see the remaining time
Fig. 26 Change the time if desired
PRESS