20
5-4 Fuse Replacement
Warning
For safety reasons, replace fuse with the appropriate
voltage/amperage recommended. Using a different fuse than
recommended may result in fire or electric shock.
Replacing the fuse while the unit is still on or while the power
cord is still plugged into a power source can cause electric shock.
Unplug the unit before replacing fuse.
①
Turn the HVP-2100 off and unplug the power cord from the receptacle in back.
②
Replace fuses as instructed in following figures (Fuse rating is T2AL250V)
a) Remove fuse holder by gently prying it out with a small, flathead screwdriver. Fuse
holder should slide straight out from its slot under the power cord receptacle (Fig A)
b) Replace the tubular
fuses in the fuse box with
the appropriate fuses.
(Fig B)
c) Slide the fuse holder
back into the slot that it
was removed from in the
same way it was
removed earlier.
Read the content of Chapter 3, Chapter 4 and this section before attempting any service.
Fig A
Fig B
Fuse holder