17
When the unit is in operation mode, each time the UP key is pressed;
In the
PrSet
option, you can specify the value to be equalized when the Tare key is
pressed.
If your EPA300, which is specially manufactured according to your order, has the
Digital Tare Input module, you can make settings from the
INPUT
menu under the
Tare menu.
The
EDGE
option determines which edge of the edge signal coming from the Tare
function is activated. RISE for rising edge,
FALL
for falling edge. For example; When
you connect this signal to a button, the RISE option activates the tare when the
button is pressed and the FALL option when the button is released after the button
is pressed.
In the
FILTR
option, you can specify how many milliseconds the modulated signal is
to be controlled. By default, this value is 100 ms.
6.3.3
Screen Refresh Rate (REFRS)
Indicates how many milliseconds the value displayed on the screen will be refreshed.
By default this value is 100 ms; To reduce or reduce the on-screen vibrations, or
reduce the duration of your device's response to movement of the sensor.
ZERO:
Then the value read on the sensor is equal to zero and the
Tare state LED is lit.
PRESET:
Then, the value read on the sensor is equalized to the
specified value and the Tare status LED is lit.
REPEATED ZERO:
The first time it is pressed, the value read on the
sensor is equal to zero and the Tare status LED is lit. When it is
pressed later, the read value returns to the state before the key is
activated and the Tare status LED is turned off.
REPEATED PRESET:
When pressed for the first time, the value read
on the sensor is equal to zero and the Tare status LED is lit. When
it is pressed later, the read value returns to the state before the
key is activated and the Tare status LED is turned off.
.
.
