Esko Kongsberg XL, Руководство пользователя

Страница: 47 / 166

10
Kongsberg XL
10. System Setup
10.1. Introduction
This chapter will explain functions and parameters that are important for the to run properly.
It is a supplement to the information available from the
User Manual for i-cut Production
Console .
Examine each step carefully to ensure proper settings:
One time adjustments completed at the factory
The functions are included here as a reference.
They are not used during normal operation.
If necessary, they should be repeated, as indicated in the function description.
1 Adjust X1 to X2 Angle
2 Register Table Size
4 Set Ruler Position
5 Set Main Reference Point
6 Map Table Top Surface
8 Vacuum Setup
9 Router Setup
Adjustments to customize the table
1 Select Reference Point
2 Set Table Speed
3 Set Table Acceleration
4 Jog Settings
47