Esko Kongsberg XL, Руководство пользователя, Страница: 132 / 166

13
Kongsberg XL
How to set Cutting Depth
• When inserting a new Knife
Blade , align the tip of the knife
with the sliding sleeve and zero
the depth meter (A).
• Then adjust the micrometer
screw (Starret micrometer (218))
until desired depth is displayed
(B).
• During execution, the foot is
floating on top of the material.
To adjust the foot downward
pressure, adjust the Foot
pressure screw.
• The pressure should be high
enough to ensure good contact
between the foot and the top of
the material, without scratching
the material.
Note: To secure good contact
between the foot and the top
of the material, the foot should
be lifted 1 – 1.5 mm (0.4 – 0.6 in)
during execution (C). (Tool height
adjustment).
How to change Knife Blade
1. Remove the knife tool from the Tool Head .
2. Remove the sliding sleeve from the tool.
3. The Knife Blade is held by a hex-screw. A 1.5 mm key will fit.
4. Loosen the hex-screw and insert the new blade.
5. When inserting the new blade, please make sure that:
a. The back of the Knife Blade is aligned along the reference edge of the blade socket. (To
ensure blade perpendicularity).
b. 3 mm of the blade protrudes from the blade socket (X-acto #11).
6. Tighten the hex-screws and reattach the knife tool.
For this tool, complete the following adjustments:
Parameter Description
Tool Height The foot should touch the material surface, see above.
Lag Setting The knife lag depends upon the actual knife blade adapter and knife
blade.
Tool Rotation Adjust tool angle tangential to moving direction.
132