Esko Kongsberg XL, Руководство пользователя

Страница: 42 / 166

9
Kongsberg XL
9.3. Multi Pass Milling
Opened Job -> Layers -> Edit Layer
Menu Bar -> Layer -> Edit Layer
1. pass 2. pass 3. pass - mill through and
clean the path
Multi Pass Milling is beneficial if you want to mill through a material where the thickness is
bigger than the milling bit diameter.
9.4. Job including Reverse Operation
Reverse Operation is used if operations need to be done from both sides. There are two types
of Reverse Operations :
• Ruler based
• Camera based
Which methode is available, is HW dependant, and described in the following sections. If
Crease needs to be done from both sides, ruler based Reverse Operations is commonly used.
For Print registration , Regmarks need to be read, before sheet is flipped and processed from
the other side.
Menu Bar -> Advanced -> Configure Tools
Menu Bar -> Layer -> Edit Layer ...
Opened Job -> Layers Tab -> Edit Layer
42