Esko Kongsberg XL, Руководство пользователя

Страница: 75 / 166

12
Kongsberg XL
Note:
V-notch Knife Adapters are available for
different knife angles: 15
o
, 22.5
o
, 30
o
, 45
o
,
47.5
o
. There is also a VariAngle unit available
for cutting any angle from -2 to 60
o
(release
Q3 2020).
In this chapter, a 45
o
knife angle is discussed.
The programming and operation will be
similar for other angles.
V-notch specific parameters
Rotational compensation
Rotational compensation is used to optimize V-notch / Bevel Cut quality in challenging
materials and use cases. This feature will pre-load the knife blade and overcome mechanical
flexibility in the system.
Notch angle
Notch Angle is used for the VariAngle unit *) only, and determines the angle of the blade into
the material. 0
o
is a vertical cut. For V-notch knifes , angle is determined by type of V-notch
knife mounted.
*) VariAngle unit will be released Q3 2020.
Cut
75