Esko Kongsberg XL, Руководство пользователя, Страница: 51 / 166

10
Kongsberg XL
User Defined Reference Points
You can specify User Defined Reference Points .
User Defined Reference Points are used if you want your job positioned in a fixed position on
the table (Rx), but not in the Main Reference Point (R).
A special version of User Defined Reference Point is the Panel Reference Point .
1 Position the Laser Pointer in the position where you want your Panel
Reference Point .
2 Press the Set Reference Point button on Operators Panel .
The Panel Reference Point is set to current Laser Pointer Position
Rulers and Reference Points
The Ruler System ensures an easy and
correct positioning of the material on the
table.
The
Main Reference Point shall be defined dr
= 10 mm/0.39 in. inside the ruler.
When you use the Right Ruler , the Reference
Point will automatically be moved to an
identical distance from the Right Ruler , as it is
defined from the Left Ruler .
The Right Ruler is normally used for Reverse
Score operations. At the same time the
direction of the X axis is reversed.
10.8. Table Speed
Menu Bar -> Advanced -> Configure Tools ...-> Velocity X/Y
This is the default value for each Tool when Layers are created.
Opened Job -> Edit Layer -> Speed X/Y
Modify Speed for this particular Job.
Opened Job -> Production Setup -> Quality
Here you specify if this is a High Quality Job or High Speed Job .
51