
Conformity
The EPPC-T10 is an industrial product and meets the demands of the EU regulations and EMC
standards printed in the conformity declaration at the end of this manual.
Warning:
In a residential, commercial or light industrial environment the EPPC-T10 may cause radio
interferences in which case the user may be required to take adequate measures.
Data Safety
This device is equipped with an Ethernet or other interface which is suitable to establish a connection to
data networks. Depending on the software used on the device, these interfaces may allow attackers to
compromise normal function, get illegal access or cause damage.
esd does not take responsibility for any damage caused by the device if operated at any networks. It is
the responsibility of the device's user to take care that necessary safety precautions for the device's
network interface are in place.
Intended Use
The intended use of the EPPC-T10 is the operation as controller for machine control (factory
automation).
The guarantee given by esd does not cover damages which result from improper use, usage not in
accordance with regulations or disregard of safety instructions and warnings.
● The EPPC-T10 is intended for operation in a control cabinet.
● The operation of the EPPC-T10 in hazardous areas, or areas exposed to potentially explosive
materials is not permitted.
● The operation of the EPPC-T10 for medical purposes is prohibited.
Service Note
The EPPC-T10 does not contain any parts that require maintenance by the user. The EPPC-T10 does
not require any manual configuration of the hardware, except the change of battery or the configuration
via jumper or DIP switches. Unauthorized intervention in the device voids warranty claims.
Disposal
Devices which have become defective in the long run have to be disposed in an appropriate way or
have to be returned to the manufacturer for proper disposal. Please, make a contribution to
environmental protection.
Typographical Conventions
Throughout this manual the following typographical conventions are used to distinguish technical terms.
Convention
Example
File and path names
/dev/null
or
<stdio.h>
Function names
open()
Programming constants
NULL
Programming data types
uint32_t
Variable names
Count
Number Representation
All numbers in this document are base 10 unless designated otherwise. Hexadecimal numbers have a prefix
of 0x. For example, 42 is represented as 0x2A in hexadecimal .
Abbreviations
CPU
Central Processing Unit
HW
Hardware
I/O
Input/Output
n.a.
not applicable
OS
Operating System
SDK
Software Development Kit
Page 6 of 37
Hardware Manual • Doc. No.: I.2007.21 / Rev. 1.1
EPPC-T10