ESCO Technologies Labculture LB2 Series, Руководство пользователя

Страница: 28 / 34

18
Accessing the paper catch
The purpose of accessing the paper catch is to remove any retained materials that might cause obstructions.
Care must be taken as the area is contaminated.
Before opening the paper catch:

Use appropriate personal protective equipment (PPE).

Wipe down the interior of the BSC including the top and bottom surfaces of the work tray(s) while
airflow is operating.

If the interior cannot be wiped down, the BSC should be decontaminated
Sash cleaning procedure for non-motorized sash BSC
1. Remove armrest
2. Lower the sash by continuously until the sash is in the lowest position and create a 10 cm opening
between the sash and the diffuser
3. Open the front panel.
4. Slide your hand through the opening and clean the inner side of the sash using cloth and IPA 70%
5. After cleaning, push continuously until the sash is in the sash ready position
6. Close the front panel.
7. Reattach armrest
Accessing the paper catch
1. Turn the blower off. Then raise the sash to
fully open position for easy access.
2. Remove the tray(s) to access the paper catch.
3. The figure beside, points to the location of
the paper catch. Locate and remove any
material trapped. Be careful of any sharp
objects that might be present. You might
want to use a mirror to help you see better.