Escea KS1150 Peninsula 400, Инструкция по установке и обслуживанию, Страница: 46 / 52

B
A
C
D
E
F
G
SER
VICE
46
S6 Replacing the burners
Remove all components of the fuelbed, taking care not to damage any of the fuelbed media.
Remove the 4 screws in the infill and lift from the fire box, by lifting one end up into the top corner
and then out towards you. Take care not to scratch the firebox paint and lift out the burners (see
section E4 “Remove the Infill & Burners” on page 25).
S7 Serial Number
The serial number for the fire can be found in two places. The first is in the battery compartment of
the wireless remote under the batteries. The second is on the data sticker on the chassis under the
electronics tray.
S8 Removing or Cleaning Fan
As part of regular service procedure, it is recommended that the fan is removed for cleaning. Dust
will build up on the fan rotor and in the cavity where the fan is located. This can be removed by the
service person using a hearth brush and a vacuum cleaner.
ISOLATE THE POWER TO THE FIRE BEFORE COMMENCING THIS PROCEDURE.
Screw Locations:
S9 Removing the Control Tray
ISOLATE THE POWER TO THE FIRE BEFORE THIS PROCEDURE.
Follow sections E3 “Removing (and Replacing) the Glass” on page 24 and E4 “Remove the Infill
& Burners” on page 25 to remove the glass, burners, and infill.