background image

 9

Safety 

Precautions

 Page 6 

 

 

 WARNING for Using R32/R290 Refrigerant

2

2

2

2

2

2

When flammable refrigerant are employed, appliance shall be stored in a well -ventilated area 
where the room size corresponds to the room area as specifiec for operation.
For R32 frigerant models:
Appliance shall be installed, operated and stored in a room with a floor area larger than 4m . 
Appliance shall not be installed  in an unvertilated space, if that space is smaller than 4m  .
For R290 refrigerant models, the minimum room size needed:
<=9000Btu/h units:  13m
>9000Btu/h and <=12000Btu/h units: 17m
>12000Btu/h and <=18000Btu/h units: 26m
>18000Btu/h and <=24000Btu/h units: 35m
Reusable mechanical connectors and flared joints are not allowed indoors.
(

EN

 Standard Requirements).

Mechanical connectors used indoors shall have a rate of not more than 3g/year at 25%
of the maximum allowable pressure. When mechanical connectors are reused indoors,
sealing parts shall be renewed. When flared joints are reused indoors, the flare part 
shall be re-fabricated. (

UL

 Standard Requirements)

When mechanical connectors are reused indoors, sealing parts shall be renewed. When 
flared joints are reused indoors, the flare part shall be re-fabricated. 
(

IEC

 Standard Requirements)

European Disposal Guidelines

This appliance contains refrigerant and other potentially hazardous materials. When disposing of 
this appliance, the law requires special collection and treatment. 

Do not

 dispose of this product as 

household waste or unsorted municipal waste. 
When disposing of this appliance, you have the following options:

•  Dispose

 

of

 

the

 

appliance

 

at

 

designated

 

municipal

 

electronic

 

waste

 

collection

 

facility.

•  When buying a new appliance, the retailer will take back the old appliance free of charge.

•  The manufacturer will take back the old appliance free of charge.
•  Sell the appliance to certified

 

 scrap metal dealers.

Special notice

Disposing of this appliance in the forest or other natural surroundings endangers your health and is 
bad for the environment. Hazardous substances may leak into the ground water and enter the food 
chain.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that waste electrical and 

eletrical equipment should not be mixed with general household waste.

 Page 7 

Unit Specifications and Features

Unit 

Specifications 

and Featu

res

Indoor unit display

Display Code 

Meanings

Power Cable (Some Units)

 

Remote Control

Remote Control 

Holder (Some Units)

Functional Filter 

(On Back of Main Filter - Some Units)

Louver

Front Panel

Display window

(A)

(B)

(C)

(D)

“            ” 

“            ” 

 when ECO function is activated(some units)

 Lights up in different colour according to the operation 
mode(some units):
Under COOL and DRY mode, it displays as cool colour.
Under HEAT mode, it displays as warm colour.

“        ”   when Wireless Control feature is activated(some units)

“       ”   for 3 seconds when:
• TIMER ON is set
• FRESH , SWING, TURBO , SILENCE  or SOLAR PV ECO  feature is turned on

“       ”   for 3 seconds when:
• TIMER OFF is set
• FRESH , SWING, TURBO , SILENCE  or SOLAR PV ECO  feature is turned off

“       ”   when defrosting(cooling & heating units)

“       ”   when anti-cold air feature is turned on

“       ”   when unit is self-cleaning

“       ”   when 8 C heating feature is turned on

“           ” 

Displays  temperature, operation feature and Error codes: 

Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit 
may be slightly different. The actual shape shall prevail. 

NOTE:

 

Different models have different front panel and display window. Not all the indicators 

describing below are available for the air conditioner you purchased. Please check the indoor display 
window of the unit you purchased.

Содержание ESAC25RC













































Отзывы: